Chapter 8 Set Up Geode Connect for Windows PC 113
Owner's Manual
1. Open Geode Connect.
If the device has connected to a Geode previously, tap the
Geode name at the top of the screen.
The app will ask you what you would like to do.
Note: If the device has not previously connected to a Geode,
the app will immediately open the Device Setup page
when you open the app.
2. Tap Change Device. This opens the Device Setup page.
3. The app will display a list of local wireless and connected
devices. It may list the same Geode twice, once as a
Bluetooth wireless device and once as a physically
connected device. The Geode connected via serial cable
will have a plug icon next to it. Select this Geode.
To Next Page
Loading...
Need help?
General