Chapter 7 Learn Geode Connect for Android 83
Owner's Manual
Geode Connect will open Developer Options so that you
can set the mock location provider.
4. Tap Select mock location app. (In older versions of
Android, the option will be Allow mock locations, and it
will not ask you for a specific app.)
5. Tap Geode Connect in the list of possible apps.
6. Tap the Android back button to return to Geode
Connect.
Test Mock Location Provider
After configuring Geode Connect as your mock location
provider, test to make sure your app is now getting its data
from the Geode.
Both of the following tests require that the Geode is on and
has had time to build its initial almanac, usually 25 minutes
after it has been turned on for the first time outside.
One-Person Test:
1. Connect the Geode to your Android device via
Bluetooth wireless technology in Geode Connect.
2. Verify that Geode Connect has been set as the mock
location provider.
3. Leave Geode Connect open.
To Next Page
Loading...
Need help?
General