• Prefix—IP address of the network
• Length—Length of the subnet mask for the network
• usNbr/Owner—IP address of the upstream neighbor associated with this route or a
description of the origin of the route
• Dvmrp Local—Route is associated with a directly attached network
• Dvmrp Aggregate—Route is an aggregate route determined by summarization
• Metric—Metric associated with this interface for this route
• ExpireTime—Time, in seconds, until the VR starts the process for removing the route
• UpTime—Length of time, in seconds, that the route has been in the DVMRP routing
table
• Interface—Type and specifier for the interface, such as atm3/0.
• Example 1
host1:boston>show ip dvmrp route
Prefix/Length usNbr/Owner Metric ExpireTime UpTime Interface
14.0.0.0/8 Dvmrp Local 1 Never 18 atm5/0.14
Downstream Interface(s)
Interface
atm5/0.15
15.0.0.0/8 Dvmrp Local 1 Never 18 atm5/0.15
Downstream Interface(s)
None
25.0.0.0/8 14.0.0.1 2 129 11 atm5/0.14
Downstream Interface(s)
Interface
atm5/0.15
• Example 2
host1:v3# show ip dvmrp route brief
Prefix/Length usNbr/Owner Metric ExpireTime UpTime Interface
14.0.0.0/8 Dvmrp Local 1 Never 26 atm5/0.14
15.0.0.0/8 Dvmrp Local 1 Never 26 atm5/0.15
25.0.0.0/8 14.0.0.1 2 121 19 atm5/0.14
• See show ip dvmrp route.
show ip dvmrp routeNextHop
• Use to display information about the next hop.
• Field descriptions
137Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Configuring DVMRP
To Next Page
Loading...