Juniper JUNOSE 11.2.X MULTICAST ROUTING

• Grp Address—Address of the multicast group
• Interface—Type and identifier of the upstream interface associated with the multicast
group
• Grp Mode
• Blank—No sources included or excluded for this group
• Include—Sources included for this group
• Exclude—Sources excluded for this group
• Count—Total number of multicast groups associated with this interface
• Example 1
host1#show ipv6 mld-proxy groups
Grp Address Interface Grp Mode
--------------- --------------- --------------
ff0e::1 ATM5/1.200
ff0e::2 ATM5/1.200
ff0e::3 ATM5/1.200 Include(1):
2001::1
ff0e::4 ATM5/1.200
ff0e::5 ATM5/1.200 Exclude(1):
2001::2
Counts: 3 <*,G>, 1 Exclude (1 sources), 1 Include (1 sources)
(5 total)
• Example 2
host1#show ipv6 mld-proxy groups ff0e::1
Grp Address Interface Grp Mode
--------------- --------------- --------------
ff0e::1 ATM5/1.200
Counts: 1 <*,G>
(1 total)
• Example 3
host1#show ipv6 mld-proxy groups count
Counts: 3 <*,G>, 1 Exclude (1 sources), 1 Include (1 sources)
(5 total)
• See show ipv6 mld-proxy groups.
show ipv6 mld-proxy interface
• Use to display information about the interface on which you configured MLD proxy.
• To view information about a particular interface, enter an interface type and specifier,
such as atm 3/0. For details about interface types and specifiers, see Interface Types
and Specifiers in JunosE Command Reference Guide.
• Specify the brief option to display a summary rather than a detailed description.
• Field descriptions
Copyright © 2010, Juniper Networks, Inc.204
JunosE 11.2.x Multicast Routing Configuration Guide