Juniper MX80 Hardware Guide

•
GR-1089-Core: EMC and Electrical Safety for Network Telecommunications Equipment
•
SR-3580 NEBS Criteria Levels (Level 3 Compliance)
Compliance Statements for NEBS for MX5, MX10, MX40, and MX80 Routers
•
The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
•
The equipment is suitable for installation in locations where the National Electrical
Code (NEC) applies.
•
The battery return connection is to be treated as an isolated DC return (that is, DC-I),
as defined in GR-1089-CORE.
•
You must provision a readily accessible device outside of the equipment to disconnect
power. The device must also be rated based on local electrical code practice.
Compliance Statements for EMC Requirements for MX5, MX10, MX40, and MX80 Routers
•
Canada on page 175
•
European Community on page 175
•
Israel on page 175
•
Japan on page 176
•
United States on page 176
Canada
CAN ICES-3 (A)/NMB-3(A)
European Community
This is a Class A product. In a domestic environment, this product might cause radio
interference in which case the user might be required to take adequate measures.
Israel
Translation from Hebrew—Warning: This product is Class A. In residential environments,
the product may cause radio interference, and in such a situation, the user may be required
to take adequate measures.
175Copyright © 2019, Juniper Networks, Inc.
Chapter 7: Safety and Compliance Information

Juniper MX80 Specifications

General

Model	MX80
Category	Network Router
Throughput	80 Gbps
Power Supply	AC or DC
Operating System	Junos OS
Memory	4 GB
Height	1U