CHAPTER 2
Site Planning, Preparation, and
Specifications
•
MX5, MX10, MX40, and MX80 Site Preparation Checklist on page 59
•
MX5, MX10, MX40, and MX80 Site Guidelines and Requirements on page 61
•
MX5, MX10, MX40, and MX80 Network Cable and Transceiver Planning on page 67
•
MX5, MX10, MX40, and MX80 Management, and Console Port Specifications and
Pinouts on page 72
MX5, MX10, MX40, and MX80 Site Preparation Checklist
The checklist in Table 32 on page 59 summarizes the tasks you must perform when
preparing a site for router installation.
Table 32: MX80 Site Preparation Checklist
DatePerformed ByFor More InformationItem or Task
Environment
“MX5, MX10, MX40, and MX80 Router
Environmental Specifications” on
page 62
Verify that environmental factors such as
temperature and humidity do not exceed router
tolerances.
Power
“MX5, MX10, MX40, and MX80 Router
Grounding Specifications” on page 62
Locate sites for connection of system
grounding.
“MX5, MX10, MX40, and MX80
Routers AC Power Specifications” on
page 35
“MX5, MX10, MX40, and MX80
Routers DC Power Specifications” on
page 39
Measure distance between external power
sources and router installation site.
59Copyright © 2019, Juniper Networks, Inc.