Ensure that you have the following parts and tools available:
•
A Phillips (+) screwdriver, number 2 or number 3, depending on the size of your rack
mounting screws, for mounting the QFX3500 device on the rack.
To remove a QFX3500 device from a rack or cabinet:
1. Have one person support the weight of the device while another person uses the
screwdriver to remove the mounting screws that attach the chassis front-mounting
brackets to the rack or cabinet.
2. Remove the QFX3500 device from the rack or cabinet.
3. Use the screwdriver to remove the mounting screws that attach the mounting blades
attached to the rear of the rack or cabinet.
4. Place the removed screws and mounting blades in a labeled bag. You will need them
when you reinstall the chassis.
5. Transport the QFX3500 device to your desired new location.
Related
Documentation
• Mounting a QFX3500 Device in a Rack or Cabinet on page 77
Copyright © 2017, Juniper Networks, Inc.146
QFX3500 Device Hardware Documentation
To Next Page
Loading...
