Juniper SRX220

SRX220 Services Gateway Safety Requirements, Warnings, and Guidelines
To avoid harm to yourself or the device as you install and maintain it, follow the guidelines
for working with and near electrical equipment, as well as the safety procedures for
working with devices. For a discussion of how to make the installation site a safe
environment and a list of safety warnings, see “General Site Guidelines for Installing the
SRX220 Services Gateway” on page 29 and “SRX220 Services Gateway General Safety
Guidelines and Warnings” on page 127.
NOTE: Providing an exhaustive set of guidelines for working with electrical
equipment is beyond the scope of this guide.
Related
Documentation
• General Site Guidelines for Installing the SRX220 Services Gateway on page 29
• SRX220 Services Gateway General Safety Guidelines and Warnings on page 127
• Required Tools and Parts for Installing and Maintaining the SRX220 Services Gateway
on page 46
• Preparing the SRX220 Services Gateway for Rack-Mount and Wall-Mount Installation
on page 53
131Copyright © 2016, Juniper Networks, Inc.
Chapter 20: General Safety Guidelines and Warnings