Related
Documentation
Connecting the Modem to the Console Port on the SRX220 Services Gateway on
page 70
•
• Connecting to the CLI at the User End for the SRX220 Services Gateway on page 70
• SRX220 Services Gateway Software Configuration Overview on page 77
Configuring PoE Functionality on the SRX220 Services Gateway
To enable the Power over Ethernet (PoE) feature support on your SRX220 Services
Gateway, you must configure the services gateway.
You can configure PoE using the Junos OS command-line interface (CLI).
For more details on configuring PoE, see Interfaces for Security Devices.
Related
Documentation
• SRX220 Services Gateway Description on page 3
• SRX220 Services Gateway Specifications on page 29
• SRX220 Services Gateway Front Panel and Back Panel Views on page 11
• SRX220 Services Gateway Built-In Interfaces on page 13
• SRX220 Services Gateway LEDs on page 16
• SRX220 Services Gateway Mini-Physical Interface Modules on page 9
99Copyright © 2016, Juniper Networks, Inc.
Chapter 16: Performing Initial Configuration
To Next Page
Loading...
Need help?
General
