Juniper SRX220

If any part is missing, contact your Juniper Networks customer service representative.
The shipment contains a fully configured SRX220 Services Gateway, including the chassis
with installed components listed in Table 24 on page 50, and an accessory box, which
contains the parts listed in Table 25 on page 50.
NOTE: The parts shipped with your device can vary depending on the
configuration you ordered.
Table 24: Parts List for a Fully Configured SRX220 Services Gateway
QuantityComponent
1SRX220 Services Gateway
•
For standard model :
SRX220 Services Gateway with 8xGE ports, 2xMini-PIM slot
•
For PoE model:
SRX220 Services Gateway with 8xGE PoE ports (120 W total), 2xMini-PIM
slot
1Power supply adapter
•
60 W for standard model
•
200 W for PoE model
13-prong power cord
1DB-9 to RJ-45 adapter and straight-through cable, 7 feet
Table 25: Accessory Parts List for the SRX220 Services Gateway
QuantityPart
1Juniper Networks Product Warranty
1End User License Agreement
1SRX220 Services Gateway Quick Start
1Security Products Safety Guide
1Juniper Compliance Form Letter
1Product Registration
6Cable tie
Copyright © 2016, Juniper Networks, Inc.50
SRX220 Services Gateway Hardware Guide for H Model Numbers