NOTE: The mounting kits available for rack and wall installation of the
SRX220 Services Gateway must be ordered separately. Contact your Juniper
Networks customer service representative for more information.
NOTE: The Mini-Physical Interface Modules(Mini-PIMs) arenot shipped with
the device. You must order them separately. Contact your Juniper Networks
customer service representative for more information.
Related
Documentation
• Required Tools and Parts for Installing and Maintaining the SRX220 Services Gateway
on page 46
• Unpacking the SRX220 Services Gateway on page 49
• Preparing the SRX220 Services Gateway for Rack-Mount and Wall-Mount Installation
on page 53
51Copyright © 2016, Juniper Networks, Inc.
Chapter 10: Unpacking the Services Gateway
To Next Page
Loading...
