CHAPTER 10
Unpacking the Services Gateway
•
Unpacking the SRX220 Services Gateway on page 49
•
Verifying Parts Received with the SRX220 Services Gateway on page 49
Unpacking the SRX220 Services Gateway
The SRX220 Services Gateway is shipped in a cardboard box. The carton also contains
the device accessories and the SRX220 Services Gateway Quick Start.
NOTE: The device is maximally protected inside the shipping box. Do not
unpack it until you are ready to begin installation.
To unpack the SRX220 Services Gateway:
1. Open the box in which the device is shipped.
2. Verify the parts received against the lists in “Verifying Parts Received with the SRX220
Services Gateway” on page 49.
3. Store the shipping box and packing material in case you need to return or move the
device at a later time.
Related
Documentation
Required Tools and Parts for Installing and Maintaining the SRX220 Services Gateway
on page 46
•
• Verifying Parts Received with the SRX220 Services Gateway on page 49
• Preparing the SRX220 Services Gateway for Rack-Mount and Wall-Mount Installation
on page 53
• Installation Overview for the SRX220 Services Gateway on page 45
Verifying Parts Received with the SRX220 Services Gateway
The SRX220 Services Gateway shipment package contains a packing list that includes
all parts and accessories available with the device. Check the parts in the shipment
against the items on the packing list. The packing list specifies the part numbers and
describes each part in your order.
49Copyright © 2016, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
