Juniper SRX3600 - Installing the SRX3600 Services Gateway Using a Mechanical Lift; Required Tools for Installing the SRX3600 Services Gateway

CHAPTER 17
Installing the SRX3600 Services Gateway Using a
Mechanical Lift
IN THIS CHAPTER
Required Tools for Installing the SRX3600 Services Gateway | 113
Preparing the SRX3600 Services Gateway for Rack-Mount or Cabinet Installation | 114
Installing the SRX3600 Services Gateway in a Rack or Cabinet Using a Mechanical Lift | 114
Required Tools for Installing the SRX3600 Services Gateway
To install the services gateway, you need the following tools:
•
Mechanical lift
•
Phillips (+) screwdriver, number 2
RELATED DOCUMENTATION
Preparing the SRX3600 Services Gateway for Rack-Mount or Cabinet Installation | 114
Installing the Mounting Hardware for the SRX3600 Services Gateway | 109
Installing the SRX3600 Services Gateway in a Rack or Cabinet Using a Mechanical Lift | 114
113