Juniper SRX3600 - Chassis Component Alarm Conditions on SRX3400 and SRX3600 Services Gateways

Chassis Component Alarm Conditions on SRX3400 and SRX3600 Services
Gateways
Table 32 on page 178 lists the alarms that the chassis components can generate on SRX3400 and SRX3600
Services Gateways.
Table 32: Chassis Component Alarm Conditions on SRX3400 and SRX3600 Services Gateways
Alarm
SeverityRemedyAlarm Condition
Chassis
Component
YellowChange air filter.Change air filter.
Air filters
YellowRemove and install the
Switch Fabric Board.
The switch fabric is
operating normally, but the
Ethernet interfaces are not
operating normally.
SFB (Switch
Fabric Board)
RedRemove and install the
Switch Fabric Board.
If problem still continues,
open a support case using
the Case Manager link at
https://www.juniper.net/support/
or call 1-888-314-5822
(toll free, US & Canada) or
1-408-745-9500 (from
outside the United States)
The Switch Fabric Board
has failed.
178