EasyManua.ls Logo

Juniper SRX3600 - SRX3600 Services Gateway Grounding Cable Specification

Juniper SRX3600
320 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SRX3600 Services Gateway Grounding Cable Specification
The grounding cable that you provide must meet the specifications in Table 16 on page 74.
Table 16: Grounding Cable Specifications
Quantity and SpecificationCable Type
One 10-AWG (5.3 mm
2
), minimum 60°C wire, or as required by the local codeGrounding
WARNING: To meet safety and electromagnetic interference (EMI) requirements and
to ensure proper operation, you must properly ground the services gateway chassis
before connecting power. See “Grounding the SRX3600 Services Gateway” on page 139
for instructions.
RELATED DOCUMENTATION
SRX3600 Services Gateway Chassis Grounding Point | 138
SRX3600 Services Gateway Grounding-Cable Lug Specification | 73
74

Table of Contents

Other manuals for Juniper SRX3600

Related product manuals