Juniper SRX3600 - Grounding the SRX3600 Services Gateway; Required Tools and Parts for Grounding and Providing Power to the SRX3600 Services Gateway

CHAPTER 20
Grounding the SRX3600 Services Gateway
IN THIS CHAPTER
Required Tools and Parts for Grounding and Providing Power to the SRX3600 Services Gateway | 137
SRX3600 Services Gateway Chassis Grounding Point | 138
Grounding the SRX3600 Services Gateway | 139
Required Tools and Parts for Grounding and Providing Power to the
SRX3600 Services Gateway
To ground and provide power to the services gateway, you need the following tools and parts:
•
Phillips (+) screwdrivers, numbers 1 and 2
•
2.5-mm flat-blade (–) screwdriver
•
Wire cutters
•
Electrostatic discharge (ESD) grounding wrist strap
RELATED DOCUMENTATION
Grounding the SRX3600 Services Gateway | 139
Connecting the SRX3600 Services Gateway to an AC Power Source | 145
Connecting the SRX3600 Services Gateway to a DC Power Source | 148
Powering On the SRX3600 Services Gateway | 150
Powering Off the SRX3600 Services Gateway | 151
137