Juniper SRX3600 - Page 206

Table 35: Tools and Parts Required (continued)
ComponentsTool or part
AllElectrostatic discharge (ESD) grounding wrist
strap
Cables and connectors
IOC
Flat-blade (–) screwdriver
Air filter
Fan tray
Routing Engine or SRX Clustering Module
SFB
Any CFM (IOC, NP-IOC, SPC, NPC)
Cables and connectors
Phillips (+) screwdrivers, numbers 1 and 2
IOC or NP-IOC
SFP, SFP+, and XFP Transceivers
Rubber safety cap
Cables and connectors
DC power supply
Wire cutters
RELATED DOCUMENTATION
Field-Replaceable Units on the SRX3600 Services Gateway | 199
Replacing the Fan Tray on the SRX3600 Services Gateway | 223
Replacing the Air Filter on the SRX3600 Services Gateway | 226
Replacing the SFB on the SRX3600 Services Gateway | 207
Replacing a Routing Engine on the SRX3600 Services Gateway | 210
Replacing a CFM Card on the SRX3600 Services Gateway | 216
Replacing an AC Power Supply on the SRX3600 Services Gateway | 230
Replacing a DC Power Supply on the SRX3600 Services Gateway | 234
201