•
When you return a component, make sure that it is adequately protected with packing materials and
packed so that the pieces are prevented from moving around inside the carton.
•
Use the original shipping materials if they are available.
•
Place the individual component in an electrostatic bag.
•
Write the Return Materials Authorization (RMA) number on the exterior of the box to ensure proper
tracking.
CAUTION: Do not stack any of the services gateway components during packing.
RELATED DOCUMENTATION
Return Procedure for the SRX3600 Services Gateway | 242
Required Tools and Parts for Packing the SRX3600 Services Gateway | 248
Packing the SRX3600 Services Gateway for Shipment | 248
250
To Next Page
Loading...
