Figure 37: AC Plug Types
WARNING: The AC power cord for the services gateway is intended for use with the
services gateway only and not for any other use.
NOTE: In North America, AC power cords must not exceed 4.5 m (approximately 14.75 ft) in length,
to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and
Canadian Electrical Code (CEC) Section 4-010(3). The cords listed in Table 19 on page 77 are in
compliance.
For information about the AC power supply, including a description of components, see “SRX3600 Services
Gateway AC Power Supply Overview” on page 55. For instructions on connecting the power cord during
initial installation, see “Connecting the SRX3600 Services Gateway to an AC Power Source” on page 145.
For instructions on replacing the AC power cables, see “Replacing AC Power Supply Cables on the SRX3600
Services Gateway” on page 232.
RELATED DOCUMENTATION
SRX3600 Services Gateway AC Power System Electrical Specifications | 76
SRX3600 Services Gateway AC Power Supply Electrical Specifications | 75
78
To Next Page
Loading...
Need help?
General
