JVC GY-DV500U - Recording Level Adjustment

No. Item Reference picture/drawing Procedure
2-17
(
W2
)
14
(
S3
)
(
P2
)
(
L9
)
(
P3
)
7
8
8
7
Band arm plate assembly,
8
Tension arm sub-assembly <Removal>
1)Remove the washer (W2).
2)Remove the screw (S3).
3)Remove the spring (P2).
4)Remove the band arm plate assembly and tension
arm sub-assembly.
Fig. 2-7-8(a)
Fig. 2-7-8(b)
6) After attaching, adjust the tension.
Fig. 2-7-8(c)
<Attaching>
1) Attach the spring (P3) to the tension arm sub-
assembly. Engage the longer end of spring to hook
a
and the shorter end to hook
b
as shown in Fig.
2-7-8(b).
2) Attach the tension arm sub-assembly.
3) Attach the band arm plate assembly.
4) Clamp with the screw (S3) and washer (W2).
5) Attach the spring (P2) to (L9).
NOTE
Be careful not to lose the spring (P3).
NOTE
After attaching, ensure that the band arm assem-
bly can rotate in the direction of the arrow as
shown in Fig. 2-7-8(c).
Attaching the spring
Step 1
Step 2
Hook (Longer end)
Hook (Shorter end)
Step 3
b
a
2-16