K-Rain KRC 9 - Manual Operation; Run a Single Zone

14 of 40
Manual Operation
Run a Single Zone
® The maximum run time
is 12hours59minutes
1. Turn the dial to
MANUAL ZONE
® ZONE No. 1 [l]
will be flashing
® The default manual run
time[m] is 10minutes–
to edit this, see
EditManual Run Time
2. Use or to select
the desired zone
® The selected zone will start
running and the RUNTIME
will decrease accordingly
® If there is a pump or
master valve connected,
PUMPA [o] will be shown
in the display, indicating
the pump/master is active
3. Press and the RUN TIME
minutes [p] will flash
4. Use or to adjust
the minutes
5. Press and the RUN
TIME hours [p] will flash
6. Use or to
adjust the hours
® The unit will revert to AUTO
after the time has lapsed
L If you forget to turn the dial
back to AUTO, the controller
will still run programs
7. To stop watering
immediately, turn the dial to
ALL OFF
n
p
o