K-Rain KRC 9 - Edit Manual Run Time; Run a Program

Manual Operation
(continued)
Edit Manual Run Time
1. To edit default MANUAL
RUN TIME turn the dial to
MANUAL ZONE
® ZONE No. 1 [n] will flash
2. Press and the RUNTIME
minutes [p] will flash
3. Use or to adjust the
RUN TIME minutes
4. Press and the
default RUNTIME
hours [p] will flash
5. Use or to adjust
the RUN TIME hours
6. Once the desired RUN
TIME is set, press to
save this as the default
manual RUN TIME
L The new default will now
always appear when the dial
is turned to MANUAL ZONE
Run a Program
1. To manually run a complete
program or to stack multiple
programs to run, turn the
desired PROGRAM
® OFF will flash on the display
2. To enable a PROGRAM,
press and the display will
change to ON
® If no RUN TIME has
been set for the desired
PROGRAM, the above
step will not work
3. To run the desired
PROGRAM immediately,
press