K-Rain KRC 9 - Fuse; System Test

22 of 40
Other Features (continued)
Fuse
® Use only 1 amp fuse M-205
L If the fuse has blown, or
there is none installed,
the display will flash
FUSEFAULT [w]
System Test
1. Turn the dial to
SYSTEMSTEST
® The system test will
begin automatically
L Your KRC9 will water
every zone sequentially
for 2 minutes each
2. Press to advance to
the next zone before the
2 minute period has elapsed
® It is not possible to
go backwards to a
previous zone
® To restart the system test
from ZONENo.1, turn the
dial to OFF, and then back to
SYSTEM TEST
w