Operating Instructions Powador-proLOG_EN Page 2121
→ Communication
- Modem fault
A fault occurred while establishing the
modem connection
→ System error:
- System file is missing
A file that is needed by the system is missing.
→ System alarms
- Alarm list
A list of the system alarms that were
triggered.
- Reset local alarms
Reset the local alarm at D0.
→ Hardware
- AI/DI fault
Analogue/digital input fault
- OCS does not respond
No reply from the current sensor
- Inverter does not respond
No reply from the inverter
Factory settings:
Network: IP address: 192.168.100.50
Subnet mask: 255.255.255.0
Modem: IP address: 192.168.200.1
Remote IP address: 192.168.200.51
Subnet mask: 255.255.255.255
Analogue: Call acceptance is active
ISDN: MSN is deleted
GSM: PIN code is 4321
Se ction 6 · Start-up
To Next Page
Loading...
Need help?
General