2928
Manual or Automatic rinsing
In this menu item, you can set an automatic or manual rinsing cycle when the
coffee machine is switched on.
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
Select the MACHINE SETTINGS tab and activate it.
The MACHINE SETTINGS tab is highlighted.
Enter the MAINTENANCE MODE tab.
The "AUTOMATIC CLEANING" tab will have two options to
choose from "MANUAL CLEANING" and "AUTOMATIC
CLEANING".
Choose the value you need.
Display message: DIRECTIVES ARE BEING SENT,
PLEASE WAIT A MOMENT.
Settings have been saved.
To exit the sub-menu, press BACK.
To exit the menu, press the EXIT touch icon and confirm your
choice by pressing the OK button.
Using a water filter
In this menu item, you can set the use of the coffee machine with or without a 50L/150L water
filter. By default, the coffee machine comes with a setting without the use of a water filter.
NOTE: The water filter connector is an optional item and is not included in the scope of delivery.
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
Select the MACHINE SETTINGS tab and activate it.
The MACHINE SETTINGS tab is highlighted.
Enter the MAINTENANCE MODE tab.
Scroll down to FILTER SETTING tab.
When activating the mode of operation of the coffee machine
using a filter, the CONFIRM INSTALLING THE FILTER
window will open.
Click "OK" to confirm the installation.
Display message: DIRECTIVES ARE BEING SENT,
PLEASE WAIT A MOMENT.
Display message: RINSING.
A small amount of water is drained into the waste water tray.
To Next Page
Loading...