EasyManua.ls Logo

Kaffit K96L - Transportation and Recycling; Recycling; Technical Data

Kaffit K96L
36 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
68
Please sAve the packaging of the coffee machine for future transportation.
Make sure to empty the water from water tank, water waste and coffee grounds
from the drip tray. Otherwise it will damage the machine.
To protect your coffee machine from freezing temperatures during transport, you
must empty the waterway of the coffee machine. Wipe the coffee machine both
inside and outside to dry.
Hot steam will come out of the coffee spout while the coffee machine is
drying. Please pay special attention to this to avoid burns.
To transport the coffee machine during the cold season, please follow the steps
described on page 30.
Transportation and recycling
Recycling
Old equipment contains parts that can be recycled and reused. Dispose of old
equipment in an environmentally responsible manner.
Voltage/Frequency 220-240 V / 50-60 HZ
Heating power
2700 W
Pump pressure 19 Bar(2 pumps, 2 thermoblocks)
Lenght of power cord 1.8 m
Gross weight (with packaging) 24.33 kg
Dimensions (Length× Width ×Height)
580 х 530 х 700 mm
Recomended daily output 120 cups
Maximum output, h. up to 60 cups/h.
Bean hopper capacity 1000 g
Water tank capacity 6 l / tap water connection
Drip tray capacity 2 l / sewege connection
Coffee grounds container ~ 40 servings
Wireless technologies
Wi-Fi / GPRS / NFC / RFID
Payment system
QR-cod,
PayPass
(plastic card with a smart-chip)
Fiscalisation Displaying a QR-code link to the fiscal receipt
on the screen (relevance 20 sec.)
*
Performance was determined by the preparation of drinks with a fixed supply of water, settings and
compliance with the breaks between preparations.
** The manufacturer reserves the right, without prior notice to the Buyer, to make changes to the design
and configuration of the coffee machine in order to improve its properties.
Technical Data

Table of Contents