KaVo ERGOcom 3 - Delete Images

ERGOcom 3
5 Operation | 5.3 Operation, with display interface (comfort/excellence)
5.3.10 Delete image / images
Note
Possible in Full Screen and Quad mode.
ERGOcom 3
Prerequisite
The image selected must be a still.
▶ Hold down the Delete image / images button for < 2 seconds.
The still is deleted and the logo selected in the OSD menu display interface is
shown.
See also:
5.4.5 Menu point, other, Page 49
▶ Hold down the Delete image / images button for > 2 seconds.
All 4 stills are deleted and the logo selected in the OSD menu display interface
is shown.
Multi footswitch control
Prerequisite
4 stills are generated using the multi footswitch control.
See also: 5.3.6 Generate still, Page 41
▶ Press the footswitch again.
Display 1 shows the prompt "Delete all images?"
▶ Hold down the footswitch for > 2 seconds to delete all 4 stills.
The logo set in the OSD menu display interface is inserted.
or
▶ Hold down the footswitch for < 2 seconds to switch image 1 to a live image.
44/56