User instructions ERGOremote
5 Operation | 5.1 Controls/displays
▶ Press the Standby button.
The right, left, up and down button functions are reset.
Note
ERGOcom 3 and the ERGOcom 3 display switch to Standby mode.
5.1.6 Delete image in Video mode
You can use the cursor buttons to navigate from one image to another. A brighter
image number indicates which image is active.
▶ Press delete.
The active image in Quad or Full Screen mode is deleted.
5.1.7 Quad mode in Video mode
You use this button to toggle between Full Screen and Quad mode.
5.1.8 Freeze in Video mode
Generate still
▶ Press the Freeze button.
The activated image is frozen.
Return to live image
▶ Hold down Freeze button for less than 3 seconds.
The still switches back to a live image.
Save still
▶ Hold down Freeze button for more than 3 seconds.
The still is saved in the USB memory of ERGOcom 3 or on the PC, depending
on the minimum system requirements.
18/25
To Next Page
Loading...
