KaVo ERGOcom 3 - Glossary

User instructions ERGOremote
7 Glossary
7 Glossary
Term Description
Display 1 Display 1 is the display connected via the VGA Monitor
interface and installed on the lamp mounting rod.
Display 2 Display 2 is the display connected via the VGA out in‐
terface.
Full screen mode The image is displayed across the entire display area.
Quad mode Four independent images are shown in the display.
OSD menu display inter‐
face
The OSD menu of the display interface. This is con‐
trolled via ERGOcom 3 and shown on Display 1.
OSD menu, ERGOcom 3 The ERGOcom 3-specific OSD menu. This is shown in
the status display.
OSD menu, Display 1 The ERGOcom 3 display-specific OSD menu. This is
controlled and shown in the display.
25/25