KaVo ERGOcom 3 - Glossary

ERGOcom 3
9 Glossary
9 Glossary
Term Description
Display 1 Display 1 is the display connected via the VGA Monitor
interface and installed on the lamp mounting rod.
Display 2 Display 2 is the display connected via the VGA out in-
terface.
Full screen mode The image is displayed across the entire display area.
Quad mode Four independent images are shown in the display.
OSD menu display inter-
face
The OSD menu of the display interface. This is con-
trolled viaERGOcom 3 and shown in Display 1.
OSD menu, ERGOcom 3 The ERGOcom 3-specific OSD menu. This is shown in
the status display.
OSD menu, Display 1 The EC3 Display-specific OSD menu. This is controlled
and shown in the display.
56/56