Kawai MP7SE - Page 29

29
Main Operation

Changing the eect category, type and additional parameters
Press and hold the EFX button for the desired zone.
The rst EFX page of the zone’s EDIT menu will be shown in the
LCD display.
Page 1/2
 arrow:
Next page
Turn the control knobs (A, B, C, D) to change the eect category,
type, and adjust additional eect parameters.
* The number of adjustable EFX parameters will vary depending on type.
For more information, please refer to page 128.
* Press the F1~F4 FUNCTION buttons (corresponding to the selected zone)
to scroll through the dierent parameter pages.
Press and hold the EFX button again to jump to the rst EFX
page of the EDIT menu, and once again to EXIT.

E.SW Mode parameter (SYSTEM menu)
The E.SW Mode parameter in the SYSTEM:Utility menu denes the extent to which EFX and other settings change when selecting sounds.
When this parameter is set to ‘Fixed’ mode, it is possible to copy the same EFX settings to multiple sounds.
* For more information about the E.SW Mode parameter, please refer to page 106.

About Substitute eects for SUB1/SUB2/SUB3 zones
As noted above, the total number of eect types available for the MAIN zone is much larger than that of the SUB zones. Therefore, when
assigning a sound to a SUB zone that was prepared using an eect only available for the MAIN zone, the MP7SE will automatically select
the closest ‘substitute’ eect. An
icon will also be shown beside the type parameter to indicate that a substitute eect is being used.
The example below shows the ‘Classic’ AutoPan eect being substituted for the ‘Standard’ AutoPan eect.
* Only the EFX1 eect will be substituted. Any eects that are assigned to EFX2 will be disregarded.
MAIN zone EFX1 screen
A sound prepared on the
MAIN zone with ‘Classic’
AutoPan eect applied.
SUB1 zone EFX screen
The same sound assigned
to SUB1 zone, ‘Standard’
AutoPan eect is
automatically substituted.
Substitute eect icon
Parameter 1
Category
Parameter 2
Type
* Above knob assignments will change depending on EFX page displayed.
hold
Eects Section