Kawai MP7SE - Page 50

50
EDIT Menu
EDIT Menu parameters (INT mode)
14. Footswitch Pedal on, off
This parameter determines whether or not the footswitch pedal
(if connected) is active for the selected sound.
* For more information about connecting pedals, please refer to page 18.
15. Footswitch Pedal Assign
28 functions (main)
18
functions (sub)
This parameter selects the function assigned to the footswitch
pedal (if connected).
* This parameter is common for all four zones.
16. Expression Pedal
on, reverse, off
This parameter determines whether or not the expression pedal
(if connected) is active for the selected sound.
When set to ‘Reverse’, the pedal’s output values will be inverted.
* For more information about connecting pedals, please refer to page 17.
17. Expression Pedal Assign
28 functions (main)
18
functions (sub)
This parameter selects the function assigned to the expression
pedal (if connected).
* This parameter is common for all four zones.
18. Right Pedal on, off
This parameter determines whether or not the right pedal of
the optional GFP-3 pedal unit is active for the selected sound.
* For more information about connecting pedals, please refer to page 17.
19. Right Pedal Assign
28 functions (main)
18
functions (sub)
This parameter selects the function assigned to the right pedal
of the optional GFP-3 pedal unit.
* This parameter is common for all four zones.
20. Center Pedal on, off
This parameter determines whether or not the centre pedal of
the optional GFP-3 pedal unit is active for the selected sound.
* For more information about connecting pedals, please refer to page 17.
21. Center Pedal Assign
28 functions (main)
18
functions (sub)
This parameter selects the function assigned to the centre pedal
of the optional GFP-3 pedal unit.
* This parameter is common for all four zones.
22. Left Pedal on, off
This parameter determines whether or not an ordinary foot
switch pedal or the left pedal of the optional GFP-3 pedal unit is
active for the selected sound.
* For more information about connecting pedals, please refer to page 17.
23. Left Pedal Assign
28 functions (main)
18
functions (sub)
This parameter selects the function assigned to an ordinary foot
switch pedal or the left pedal of the optional GFP-3 pedal unit.
* This parameter is common for all four zones.

Assignable pedal/mod. wheel functions
Function
Modulation
Panpot
Expression
Damper
Sostenuto
Soft
Resonance
Cut-o
EFX1 Parameter 1 ~ 10, EFX2 Parameter 1 ~ 10
(main)
EFX Parameter 1 ~ 10 (sub)

Assignable SW1/SW2 button functions
Function
Octave Layer
Rotary Slow/Fast
Solo
Portamento
Pitch Bend Lock
Modulation Wheel Lock
Center Pedal Lock
Left Pedal Lock
Expression Pedal Lock
Tonewheel Control