Keithley 2302 User Manual

12-18 SCPI Tables
:STATus
:OPERation
:CONDition? Read the condition register. ✓
:QUEStionable Path to control the questionable status registers:
✓
[:EVENt]? Read the event register. (Note 2)
✓
:ENABle <NRf> Program the enable register. (Note 3)
✓
:ENABle? Read the enable register.
✓
:CONDition? Read the condition register.
✓
:PRESet Return status registers to default states.
✓
:QUEue Path to access error queue.
✓
[:NEXT]? Read the least recent error message. (Note 4)
✓
:ENABle <list> Specify error and status messages for queue. (Note 5)
✓
:ENABle? Read the enabled list of messages.
✓
:DISable <list> Specify messages not to be placed in queue. (Note 5)
✓
:DISable? Read the disabled messages.
:CLEar Clear all messages from error queue.
Table 12-6 (cont.)
STATus command summary (cont.) (refer to Section 8)
Command Description
Default
parameter
SCPI
Notes:1.Commands in this subsystem are not affected by *RST. The effects of cycling power, *CLS, and :STATus:PRESet
are explained by the following notes.
2. Event registersPower-up and *CLS — Clears all bits of the registers
:STATus:PRESet — No effect
3. Enable registersPower-up and :STATus:PRESet — Clears all bits of the registers
*CLS — No effect
4. Error queue Power-up and *CLS — Clears the error queue
:STATus:PRESet — No effect
5. Enable/disablePower-up — Clears list of messages
error queue *CLS and :STATus:PRESet — No effect
messages
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com

Keithley 2302 Specifications

General

Brand	Keithley
Model	2302
Category	Power Supply
Language	English