Getting Started
3-3
3
4
8
5
67
1
2
1 CARD 1
Slot 1 for switch card. Corresponds
to Card 1 channel status display.
2 CARD 2
Slot 2 for switch card. Corresponds
to Card 2 channel status display.
3 IEEE-488
CONNECTOR
Use standard IEEE-488 cables.
4 DIGITAL I/O
Micro 8-pin DIN connector. Port
consists of four TTL output lines and
one TTL input line (one common line).
5 TRIGGER LINK IN AND
OUT
Two micro 8-pin DIN connectors.
6 CHANNEL READY
Female BNC connector for TTL output
trigger pulse.
7 EXTERNAL TRIGGER
Female BNC connector for TTL input
trigger pulse.
8 LINE POWER INPUT
WARNING: Connect to grounded outlet
using three-wire power cord.
Figure 3-2
Model 7001 rear panel
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
To Next Page
Loading...
