X5 FastMig
Operating manual - EN
CONTENTS
1. General 5
1.1 Equipment description 7
1.2 X5 Power source 9
1.3 X5 Wire feeder 11
1.3.1 X5 Wire spools and hubs 13
1.3.2 X5 Wire feed mechanism 13
1.4 X5 Manual control panel (X5 FP 300R) 14
1.5 X5 Auto control panel (X5 FP 300) 15
1.6 X5 Interconnection cable 16
1.7 X5 Cooling unit (optional) 18
2. Installation 19
2.1 Installing power source mains plug 21
2.2 Installing cooling unit (optional) 22
2.3 Installing equipment on cart (optional) 25
2.4 Installing wire feeder with fixed plate 28
2.5 Installing wire feeder with rotating plate 31
2.6 Installing cables 34
2.7 Connecting welding gun 38
2.7.1 Installing welding gun holder 38
2.8 Installing remote control 40
2.9 Installing and changing wire 41
2.10 Installing and replacing feed rolls 47
2.11 Installing and replacing wire guide tubes 51
2.12 Installing gas bottle and testing gas flow 53
2.13 How to get welding programs 55
2.14 Other optional accessories 56
3. Operation 60
3.1 Preparing welding system for use 61
3.1.1 Filling cooler and circulating coolant 62
3.1.2 Calibrating welding cable 62
3.2 Using X5 Manual control panel 63
3.2.1 Manual control panel: Settings 64
3.3 Using X5 Auto control panel 68
3.3.1 Auto control panel: Home view 69
3.3.2 Auto control panel: Memory channels 70
3.3.3 Auto control panel: Weld history 71
3.3.4 Auto control panel: Welding parameters 72
© Kemppi
3 1920960 / 2039
To Next Page
Loading...
Need help?
General
