X5 FastMig
Operating manual - EN
3. OPERATION
Before using the equipment, ensure that all the necessary installation actions have been completed according to
your equipment setup and instructions.
Welding is forbidden in places where there is an immediate fire or explosion hazard!
The interconnection cable heats up during welding. The wire feeder's cable cabinet door must be kept closed when weld-
ing, and the cables must be handled with caution if the cabinet door is opened right after welding.
Check that there is enough space for cooling air circulation in the machine vicinity.
If the welding equipment is left unused for a longer period, disconnect the mains plug from the mains.
Always check before use that interconnection cable, shielding gas hose, earth return cable and clamp and mains cable
are in serviceable condition. Ensure that the connectors are correctly fastened. Loose connectors can impair welding
performance and damage connectors.
© Kemppi
60 1920960 / 2039
To Next Page
Loading...
