Kemppi X5 FastMig Series - Lifting X5 Equipment

X5 FastMig
Operating manual - EN
3.6 Lifting X5 equipment
If you need to lift X5 FastMig equipment, pay special attention to the safety measures. Also follow the local reg-
ulations. The X5 FastMig equipment can be lifted with a mechanical hoist as a whole only when the equipment is
installed securely on a dedicated transport unit.
DO NOT attempt to lift the equipment with a hoist from the handle.
If a gas bottle is installed on cart, DO NOT attempt to lift the cart with the gas bottle in place.
4 wheel cart:
1. Ensure that the welding equipment is properly secured to the cart.
2. Connect the 4-legged chain or straps from the hoist hook to the four lifting points on the cart on both sides of
the welding equipment.
© Kemppi
87 1920960 / 2039