Kemppi X5 FastMig Series User Manual

X5 FastMig
Operating manual - EN
2.10 Installing and replacing feed rolls
Replace the feed rolls when the material and diameter of the filler wire changes.
Proceed as follows:
1. Open the wire feeder top cover.
2. Release the pressure handles on the wire feed mechanism.
3. Open the locking arms to release the feed rolls.
4. Pull the pressure roll mounting pins off.
© Kemppi
47 1920960 / 2039

Kemppi X5 FastMig Series Specifications

General

Brand	Kemppi
Model	X5 FastMig Series
Category	Welding System
Language	English