Calibration Procedures 4
Keysight 34970A/34972A Service Guide 77
Performance Verification Tests
Use the Performance verification Tests to verify the measurement performance of
the instrument. The performance verification tests use the instrument’s
specifications listed in Chapter 1, "Specifications" starting on page 29.
You can perform four different levels of performance verification tests:
Self-Test
A series of internal verification tests that give a high confidence that the
instrument is operational.
Quick Verification
A combination of the internal self-tests and selected verification tests.
Performance Verification Tests
An extensive set of tests that are recommended as an acceptance test when you
first receive the instrument or after performing adjustments.
Optional Verification Tests
Tests not performed with every calibration. Perform these tests to verify additional
specifications or functions of the instrument.
To Next Page
Loading...
Need help?
General
