EasyManuals Logo

Keysight Technologies M9036A User Manual

Keysight Technologies M9036A
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
M9036A PXIe Embedded Controller
User Guide
1
1 Introduction
Keysight’s M9036A is a 3U PXIe Embedded Controller providing:
- Intel
Core i5-520E, 2.4 GHz processor
- 4GB (or optional 8GB) 1333 MHz DDR3 Memory
*
- 160GB SATA 2.5 inch solid state drive (SSD)
- Integrated IO on the front panel includes two Gigabit Ethernet ports, four USB
2.0 ports, micro D-sub GPIB connector, ExpressCard 34, DVI-I Video, etc.
- Front Panel SMB Trigger Connector used to route an external trigger signal
(TTL level) to and from the PXI backplane with software trigger
- Preloaded with Keysight IO Libraries Suite and one of these operating
systems:
Windows Embedded Standard 7 (WES 7) 32-bit or 64-bit
Windows 10 Enterprise LTSB 2016 64-bit
- Pre-installed IVI drivers for the Keysight M9018A 18-slot PXIe chassis
Related Documentation
Because the Operating System and drivers were installed at the factory and no
additional drivers are required, no printed documentation other than the Startup
Guide is supplied with the Controller Module.
Complete M9036A documentation, as well as the M9018A chassis
documentation, is available preinstalled on the M9036A SSD. From the Windows
Start button, select All Programs > Keysight > M9036A Embedded Controller or MXIe
Chassis Family.
For the latest specifications, check the Keysight web site at:
www.Keysight.com/find/M9036A.
For the IVI driver, help file, program examples, etc. go to:
C:\Program Files\IVI Foundation\IVI\Drivers\AgM9036
For the Soft Front Panel interface: from the Window’s Start menu, select:
Start>All Programs>Keysight>M9036 PXIe Embedded Controller>M9036 SFP
* The M9036A has two 240-pin, RDIMM sockets which support DDR3-1333 REG/ECC RAM sticks. Each socket
can support memory modules up to 4GB for a total memory capacity of 8GB. The standard M9036A
configuration is a single 4GB memory stick with a factory option to add a second 4GB memory stick. Note: The
capability of addressing 4GB memory is operating system dependent. A 32-bit OS system may not be able to
address the full 4GB memory space. To use the full 4GB/8GB memory, a 64-bit OS must be used.

Table of Contents

Other manuals for Keysight Technologies M9036A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keysight Technologies M9036A and is the answer not in the manual?

Keysight Technologies M9036A Specifications

General IconGeneral
BrandKeysight Technologies
ModelM9036A
CategoryController
LanguageEnglish

Related product manuals