M9036A PXIe Embedded Controller
User Guide
53
4 Service
Keysight’s M9036A PXIe Embedded Controller has some user serviceable parts.
In general, you should not need to change switch settings. Always observe
Electrostatic Discharge precautions.
Electrostatic Discharge
Electrostatic discharge (ESD) can damage or destroy electronic components. All
work on electronic assemblies should be performed at a static-safe work station.
The following figure shows an example of a static-safe work station using two
types of ESD protection. Purchase acceptable ESD accessories from your local
supplier.
- Conductive table-mat and wrist-strap combination.
- Conductive floor-mat and heel-strap combination.
Both methods, when used together, provide a significant level of ESD protection.
Of the two, only the table-mat and wrist-strap combination provides adequate
ESD protection when used alone. To ensure user safety, the static-safe
accessories must provide at least 1 MΩ of isolation from ground.
To Next Page
Loading...
Need help?
General
