Keysight Technologies M9036A

60 Keysight M9036A PXIe Embedded Controller User Guide
Service Replacing the Hard Drive
Replacing the Hard Drive
The Keysight M9036A Embedded controller comes with a 160 GB, 2.5” Serial ATA
(SATA) II Solid State Drive (SSD).
Determining the Replacement Part Number for the SSD
This product may contain a custom image. First, look on the SSD for an
identification label that states “Solid State Drive Replacement Order
#####-#####” to obtain the replacement part number for the SSD. If there is no
identification label on the SSD, then look for the Option Label located near the
serial number on the inside of the front panel to determine the appropriate
option. Refer to the table below to determine which part number to order based
on the product’s option for the replacement SSD.
Table 1
Option
Label
Operating System/RAM Order
Keysight
Part Number
Description
WXP Windows XP M9036-5563
2
Replacement SSD with pre-imaged WinXP 32-bit
OS
W73 Windows 7 Pro (32-bit) M9536-5573
2
Replacement SSD with pre-imaged Win7 32-bit
OS
W76 Windows 7 Pro (64-bit) M9536-5576
4
Replacement SSD with pre-imaged Win7 64-bit
OS
WE3 WES 7 (32-bit) M9536-5553
2
Replacement SSD with pre-imaged WES 7 32-bit
OS
WE6 WES 7 (64-bit) M9536-5556
4
Replacement SSD with pre-imaged WES 7 64-bit
OS