Keysight Technologies M9036A User Manual

Keysight M9036A PXIe Embedded Controller User Guide 49
Accessing the BIOS setup utility BIOS Setup
- User Passwords sets a user level password for the BIOS.
- Administrators Passwords sets an administrative level password for the BIOS.
Save and Exit Setup Menu
This option allows you to:
- Save your changes to the BIOS configuration and then exit to Windows 7
- Discard changes and exit to Windows 7
- Save changes and Reset (reboot) the system
- Discard changes and Reset (reboot) the system
- Save Options saves any changes made so far to the setup options.
- Save changes and continue BIOS configuration
- Discard changes and continue BIOS configuration
- Restore the default vales for all setup options (see Note below)
- Save the current configuration as your user default
- Restore to your last saved user default
- Boot override allows you to bypass the configuration and boot immediately
from the selected device.
Make certain that you record the passwords. Passwords are not
recoverable. If you lose the passwords, you must erase the
NVRAM and reconfigure.
The “Restore the default values for all setup options” selection
does not restore the original boot priority sequence. You must use
the Boot Setup Menu (see “Boot Setup Menu” on page 47) to
manually restore the boot priority sequence.

Keysight Technologies M9036A Specifications

General

Brand	Keysight Technologies
Model	M9036A
Category	Controller
Language	English