Keysight M9036A PXIe Embedded Controller User Guide 21
Using Keysight Connection Expert Using the Controller
Using Keysight Connection Expert
1 To run Keysight Connection Expert either click Start > Keysight Connection
Expert or double-click the IO control icon ( ) in the lower right Windows
Notification area to run Keysight Connection Expert.
2 Keysight’s Connection Expert shows the GPIB interface as a VISA resource
connected to an Keysight 34420A DMM (VISA address is GPIB0::22::INSTR).
Refer to the IO Libraries Suite documentation for information on using
Connection Expert and general VISA programming information or your
specific GPIB instrument documentation for specific VISA programming
information.
3 The Instrument I/O on this PC pane shows instrument connections on your
controller. From here you can interact with the instruments in the chassis.
To Next Page
Loading...
