Keysight Technologies M9036A User Manual

Keysight M9036A PXIe Embedded Controller User Guide 9
M9036A Functional Description Introduction
Also, refer to the Trigger Driver help files for information on using the trigger
functions. The help files are available at: Select the Windows Start > All Programs >
Keysight IVI Drivers > AgM9036 PXIe Embedded Controller > Documentation.
– The default trigger route (the path established at power on or at
ResetRoute) has no internal connection to the front panel SMB connector
and no connection to any of the PXI backplane trigger lines.
– If you read the current trigger routing (GetRoute) at power on or after
executing a ResetRoute, it will return the string:
AgM9036TriggerRouteNone.
– Trigger routes other than the four described above and in the following
diagrams are invalid and result in an error. For example, you cannot route a
trigger from one backplane trigger bus line to another backplane trigger
bus line. Similarly, you cannot route a trigger sourced by the front panel
SMB connector back to itself.
Refer to the following diagrams and explanations. Also, for an example program,
refer to the IVI program examples; go to:
C:\Program Files\IVI Foundation\IVI\Drivers\AgM9036

Keysight Technologies M9036A Specifications

General

Brand	Keysight Technologies
Model	M9036A
Category	Controller
Language	English