Keysight Technologies M9036A User Manual

56 Keysight M9036A PXIe Embedded Controller User Guide
Service Clear CMOS (JP1)
10 Clearing the CMOS in this way resets the BIOS to its default settings including
resetting the real time clock (RTC). To set the RTC to the current time and
date:
a Power on or reboot your M9036A controller.
b Press the <Delete> key when the controller beeps. This should be
concurrent with the main startup screen. The BIOS setup program loads
after a short delay. Refer to “Starting the BIOS Setup Screen” on page 41.
c The Main setup menu reports some basic information of controller. Refer to
“BIOS Main Setup Menu” on page 43 for more information.
d Use the down arrow key (
↓) to select the System Date and System Time.
e Set these to the correct current date and time.
f Press the <F4> key to save the settings and then the <ESC> key to exit the
BIOS setup.

Keysight Technologies M9036A Specifications

General

Brand	Keysight Technologies
Model	M9036A
Category	Controller
Language	English