Keysight Technologies N5183B MXG - Verifying BERT Operation

412 Keysight EXG and MXG X-Series Signal Generators User’s Guide
Using BERT for N5172B/82B with Option UN7
Verifying BERT Operation
Verifying BERT Operation
The following procedures verify the operation of the signal generator’s bit error rate test (BERT)
function. The tests can be performed as part of a daily validation routine or can be used whenever
you want to check the validity of your BERT measurements.
Figure 16-14 BERT Softkey Menus
The following procedures check the signal generator’s BERT operation and
do not ensure system performance to specifications.
Select PXB/BERT to enable
BERT functionality.
see page413
see page413
see page413