Keysight E5071C ENA Series User Manual

44 Keysight E5071C ENA Series RF Network Analyzers
Troubleshooting
System Recovery
3-
Step 9. After the restart, execute initial registration. For information on the execution
procedure, refer to “Initial Registration of E5071C” on page 26.
Procedure for Windows Vista Business
HDD Revision: CN925 or above
Step 1. Turn ON the E5071C.
Step 2. The boot option is displayed. Use the downward arrow key to select the
“Keysight Recovery Solution” and press Enter
Step 3. Windows PE starts up and “Keysight Recovery Program” window is d isplayed.
Press 1, and then press Enter.
Figure 3-6 Keysight Recovery Program(1/1)
Step 4. A warning message is displayed. Press 1, and then press Enter.
Never turn off the power during the system recovery because doing so
may cause serious damage to the E5071C.
The recovery function for Factory image is only loaded.
The User back up function is not available.

Keysight E5071C ENA Series Specifications

General

Number of Ports	2 or 4
Dynamic Range	>123 dB (typical)
Connectivity	LAN, USB, GPIB
Display	10.4-inch LCD
Trace Noise	0.004 dB rms
Impedance	50 Ohm
Weight	20 kg
Dimensions	426 mm × 177 mm × 407 mm