Keysight U1732C - Turn on Your LCR Meter; Figure 1-2 Power-On Button; Table 1-1 Battery Level Indicator

Introduction 1
Keysight U1731C/U1732C/U1733C User’s Guide 21
Turn on your LCR meter
To power ON your LCR meter, press the power-on button once. The LCR meter
powers up in the auto identification (Ai) mode (see page 42) when turned on for
the first time.
Figure 1-2 Power-on button
CAUTION
To avoid instruments being damage from battery leakage:
– Always remove dead batteries immediately.
– Always remove the battery and store it separately if the LCR meter is not
going to be used for a long period.
Table 1-1 Battery level indicator
Indication Battery capacity
Full capacity
2/3 capacity
1/3 capacity
(Flashing periodically)
Almost empty (less than one day)
[1]
[1] Battery change advised. Always use the specified battery type listed in page 89.
Power-on button