Keysight U1732C - Keypad; Table 1-5 Keypad Functions

Introduction 1
Keysight U1731C/U1732C/U1733C User’s Guide 31
Keypad
The operation of each key is explained below. Pressing a key enables a function,
displays a related annunciator, and emits a beep.
Each key operation of the U1731C/U1732C/U1733C keypad (shown in Figure 1-7)
is described in Table 1-5. Click the respective “Learn more” pages in Table 1-5 for
more information on each function.
Table 1-5 Keypad functions
Legend
Function when pressed for:
Learn more
on:
Less than 1 second More than 1 second
Turns the LCR meter on or off. - page 21
Starts or stops the auto identification mode.
– Press again while the annunciator is
shown to exit this mode.
Enables or disables the ESR (equivalent series
resistance) mode.
– Press for more than 1 second to exit this
mode. The LCR meter will return to
capacitance measurement by default.
page 42
Holds or releases the present reading on the
display.
– Press again to update the reading
automatically once it is stable.
– Press for more than 1 second to exit this
mode.
Starts or stops the static recording mode.
– Press again to cycle through the
maximum (Max), minimum (Min), average
(Avg), and present (MaxMinAvg) readings.
– Press for more than 1 second to exit this
mode.
page 56
ESR
Rec
Hold
Save
Rec
Hold
Rec
Hold
Rec
Hold
Rec
Hold